Select Page

Plumbing problems can be a real headache for homeowners, and they can be quite costly to fix. However, many plumbing issues are avoidable with proper maintenance and care. In this article, we will discuss some common plumbing problems and provide tips on how to avoid them.

According to the Housing Industry Association (HIA), plumbing issues are a common problem in Australian homes. In fact, plumbing problems account for up to 40% of all home insurance claims in Australia. These issues can range from minor leaks to major pipe bursts, and they can cause significant damage to your property if left unattended.

Let’s take a look at some common plumbing problems and how to avoid them:

Clogged Drains

Clogged drains are a common plumbing issue that can be avoided with proper care and attention. To prevent clogs from forming, it’s important to be mindful of what you put down your drains. Avoid pouring grease, oil, and food scraps down your kitchen sink, as these can solidify and cause blockages. Instead, wipe excess grease and oil off your pots and pans with a paper towel and dispose of it in the trash. Use a strainer in your sink to catch food scraps and other solids, and dispose of them in the trash as well.

In the bathroom, use a hair catcher in your shower to trap hair and soap residue before they can accumulate in your pipes. Also, avoid flushing anything down the toilet except toilet paper, as other items like wipes and feminine hygiene products can cause clogs. By being mindful of what you put down your drains, you can avoid clogs and keep your plumbing system functioning properly.

Leaky Faucets

Leaky faucets are not only a nuisance but can also waste a significant amount of water over time. To prevent leaky faucets, it’s important to turn off your faucets tightly after each use.

  1. Avoid turning the handle too tightly, as this can cause damage to the internal components of the faucet.
  2. make sure to replace any worn-out parts in your faucet, such as the O-rings and washers, as these can cause leaks over time.
  3. If you notice a leak, have it fixed right away to prevent further damage to your plumbing system.
  4. Regular maintenance of your faucet, such as cleaning the aerator, can also help prevent leaks.

Running Toilets

A running toilet is a common plumbing issue that can be caused by a variety of factors, including a worn-out flapper or fill valve. To prevent running toilet issues, it’s important to regularly inspect your toilet’s internal components for wear and tear. You can do this by removing the lid of the toilet tank and looking inside.

If you notice any signs of wear, such as cracks or discoloration, it’s time to replace the affected part. Another common cause of running toilets is a water level that’s too high in the tank. You can adjust the water level by adjusting the float or adjusting the height of the fill valve. Additionally, avoid using in-tank toilet cleaners, as they can damage the internal components of your toilet and cause leaks.

By addressing running toilet issues promptly and performing regular maintenance on your toilet, you can prevent water waste and keep your plumbing system functioning properly.

Burst Pipes

Bursting pipes can cause significant damage to your home and can be a costly plumbing issue to repair. To prevent bursting pipes, it’s important to take steps to protect your pipes during cold weather. This includes insulating your pipes to prevent them from freezing, which can cause the pipes to expand and burst. You can also leave a trickle of water running from your faucets during cold weather to prevent the pipes from freezing.

If you’re going to be away from home during cold weather, make sure to leave your heating system on to prevent your pipes from freezing. In addition, it’s a good idea to have a professional plumber inspect your plumbing system annually. They can identify potential issues and recommend solutions to prevent problems from occurring.

Water Heater Issues

Water heating issues can be frustrating and inconvenient, especially when you rely on hot water for daily tasks like showering and cleaning. To prevent water heating issues, it’s important to perform regular maintenance on your water heater. This includes flushing the tank to remove sediment buildup, which can affect the efficiency of your water heater and cause it to break down.

In addition to flushing the tank, you should also check the temperature and pressure relief valve periodically to ensure it’s functioning properly. The temperature of the water in the tank should be set to no higher than 120 degrees Fahrenheit to prevent scalding and reduce energy consumption.

Additionally, it’s important to be mindful of how you use your hot water. Avoid taking excessively long showers or running your dishwasher and washing machine at the same time, as this can put a strain on your water heater. Consider installing low-flow showerheads and faucet aerators to reduce water usage and increase efficiency.

If you notice any signs of trouble with your water heater, such as strange noises or a decrease in hot water supply, have it inspected and repaired right away to prevent further damage. Ignoring water heater problems can lead to costly repairs or even replacement.

When Prevention Isn’t Enough

Even with the proper care and prevention techniques, plumbing issues can still occur. When this happens, it’s important to address the problem as soon as possible to prevent further damage to your property and minimize repair costs.

If you notice any signs of plumbing problems, such as leaking pipes, clogged drains, or running toilets, it’s important to have them inspected and repaired by a professional plumber. Ignoring these problems can lead to costly repairs and potential damage to your property.

At Aberdeen Plumbers, we specialize in emergency and service requests alike yet also have the experience to tackle most plumbing problems. Our team of licensed plumbers is available 24/7 to address your plumbing needs. We use state-of-the-art equipment and techniques to quickly diagnose and repair plumbing problems, and we stand behind our work with a satisfaction guarantee.

Conclusion

Plumbing problems can be a headache for homeowners, but they can often be prevented with proper maintenance and care. By being mindful of what you put down your drains, regularly inspecting your plumbing system, performing regular maintenance on your water heater, and addressing plumbing problems promptly, you can keep your plumbing system functioning properly and avoid costly repairs.

If you need help with your plumbing system, don’t hesitate to call Aberdeen Plumbers. Our team of licensed plumbers is available 24/7 to address your plumbing needs, and we stand behind our work with a satisfaction guarantee. Contact us today to learn more about our services and how we can help you with your plumbing needs.